Can conveying system
* Rated can conveying capacity: suitable for a filling line capacity of 300 cans/min.
* Single-lane conveyor belt speed Amax = 0.59 m/s.
* Applicable can types: various types of easy-open cans.
* The 90-degree curved conveying sections of the can conveyor use magnetic or hook-type turning.
* The side plates of the can conveyor are made of stainless steel 304, thickness ≥ 2.5mm, total width ≥ 155mm. All internal connecting parts are stainless steel. The conveyor frame lining uses stainless steel bent liners, thickness ≥ 2–3mm. The guide strips and rail supports are formed by drawing 1.2mm thick stainless steel sheets (M-shaped).
* The can conveyor support frames are made of Φ50 x 2mm stainless steel tubes. Rail supports, support frame clamps, and connecting frames are all stamped from brushed stainless steel sheets. Guardrail push rods are made of Φ12–14mm stainless steel material, and machine foot plates are made of ultra-high molecular weight materials.
* All fasteners are made of stainless steel materials (including foot adjustment screws).
* Conveyor chain plates use high-quality domestically produced nylon chain plates. Each lane of the can conveyor has a pitch of 85mm, with chain plate specifications of 82.5 x 38.1 x 3mm.
* Stainless steel cable trays are 100 x 50mm in size, with material thickness ≥ 1.0mm, installed on the side of the conveyor belt. Cable tray corner connections use standard 45 or 90 degree connectors.
* The transmission gear motors use high-quality domestically produced shaft-mounted gear motors.
* Can inspection uses liquid level detection.
* The drive wheels of the can conveyor are machined from solid 1010 nylon (split-type structure).
* Matching guide strips, guardrails, support rollers, magnetic curved guide rails, round tube foot nuts, and center foot plates are all made of high-quality domestic engineering plastics.
* Single-lane conveyor belt speed Amax = 0.59 m/s.
* Applicable can types: various types of easy-open cans.
* The 90-degree curved conveying sections of the can conveyor use magnetic or hook-type turning.
* The side plates of the can conveyor are made of stainless steel 304, thickness ≥ 2.5mm, total width ≥ 155mm. All internal connecting parts are stainless steel. The conveyor frame lining uses stainless steel bent liners, thickness ≥ 2–3mm. The guide strips and rail supports are formed by drawing 1.2mm thick stainless steel sheets (M-shaped).
* The can conveyor support frames are made of Φ50 x 2mm stainless steel tubes. Rail supports, support frame clamps, and connecting frames are all stamped from brushed stainless steel sheets. Guardrail push rods are made of Φ12–14mm stainless steel material, and machine foot plates are made of ultra-high molecular weight materials.
* All fasteners are made of stainless steel materials (including foot adjustment screws).
* Conveyor chain plates use high-quality domestically produced nylon chain plates. Each lane of the can conveyor has a pitch of 85mm, with chain plate specifications of 82.5 x 38.1 x 3mm.
* Stainless steel cable trays are 100 x 50mm in size, with material thickness ≥ 1.0mm, installed on the side of the conveyor belt. Cable tray corner connections use standard 45 or 90 degree connectors.
* The transmission gear motors use high-quality domestically produced shaft-mounted gear motors.
* Can inspection uses liquid level detection.
* The drive wheels of the can conveyor are machined from solid 1010 nylon (split-type structure).
* Matching guide strips, guardrails, support rollers, magnetic curved guide rails, round tube foot nuts, and center foot plates are all made of high-quality domestic engineering plastics.